Can I search "configuration-summary" with boolean operators
Compliance reports tell us which network devices do not have a specific statement. I know that I can use 'config summary' under NCM to see which devices do have a specific line . I tried & failed...
View ArticleCheckpoint 80 configuration manager
Hi all, we are trying to get NCM working for our Checkpoint firewalls. I have found the template for checkpoint gaia 77.30.When testing I keep getting 'fix connection in Device Template'.I took the...
View ArticleClik here to view.
Checkpoint firewall backup using NCM
Hi Team, We are going to backup the Switches,routers& firewall using NCM.I have a idea about the switches,Routers how the backup is working.I don't how how to backup the config for...
View ArticleClik here to view.
Serials & Version Search Resource
Hi Community, A nifty little resource to help you locate Serial numbers & Versions. Previously I using this as a report but i like the idea to be able to search for serial numbers and other asset...
View ArticleNCM - Checkpoint rule configuration management
Hi, We are managing Checkpoint firewall with NCM. This manage the box config but not the firewall rule. How can we monitor the rules themself and activate configuration change maangement on the rules ?...
View ArticleNeed to be able to pull variable from a Cisco router and use that in a config...
Good morning I need to be able to pull the cisco router's default gateway address and use that to create a static route, ie abc-de-01234-01#show ip route | inc resortGateway of last resort is...
View ArticleClik here to view.
Clik here to view.
How does Overall Baseline vs. Running Config Conflicts work?
From Orion console under Configs/Config Summary,there is a pie chart for Overall Baseline vs Running Config Conflicts. I've read the documentation and think I have everything right, but I can't get the...
View ArticleClik here to view.
Do you manage a Cisco ASA with Large ACL rulesets?
Looking for a few customers that manage Cisco ASA firewalls with large ACL rulesets. Please contact me at jeff.stewart@solarwinds.com if you're willing to work with us on our upcoming release of NCM....
View ArticleClik here to view.
Can NCM backup / manage Cisco ISE?
I'd love to track configuration changes in Cisco ISE with NCM. Is this possible?
View ArticleClik here to view.
Device template not for backup configuration..
Hi Its probably a feature request ...Is there a way to get a device template that gets other information from the device? like in case of HW that has not a inventory MIB for example?or just like to...
View ArticleNCM 7.6 ASA Firmware update?
Hello, We are trying to get the Firmware upgrade feature to work with Cisco ASA devices. The problem we are running into is having to specify the source interface for the TFTP or SCP copy operation to...
View ArticleClik here to view.
Baseline for Group of Nodes?
Been messing around with baselines at bit... we use a standard config template for each type of router; for example we have one template that we base all our Cisco 2821 router deployments on.In...
View ArticleNew Cisco switch deployment process - NCM ?
Hello, i have received questions from our network team whether the NCM can anyhow help with the brand new switch deployments.Quite often we have a scenario of replacing multiple access switches in...
View ArticleNCM Compliance - Need to compare two lines in a config to verify they are...
Juniper devices have two partitions on which they install a primary and backup copy of the filesystem. In case of failure of the primary, it boots of the backup. When you do an upgrade of software,...
View ArticleClik here to view.
Using Compliance Reporting to Verify Juniper Alternate Slice Version
About a year ago I started a quest to figure out how to achieve this goal. Since I've made some major headway I decided to share it out with the community in case it comes in handy. There's probably...
View ArticleIssues with Avaya Gateway Backup
I have changed the terminal length to 200 (the max) but still get a prompt to press Enter at the end. [6/6/2017 10:51:24 AM] Save Command Output: !#[6/6/2017 10:51:24 AM] Process Line = <!# End of...
View ArticleClik here to view.
Report that shows % compliance
Hi, I am new to NCM. I have created some policies that checks the configs against a set of rules that I have created. Is there a way for the reports to show that the devices are for example 50%...
View ArticleClik here to view.
Aruba Switch Config Downloads
I am unable to download the startup-config from Aruba switches utilizing NCM. It successfully downloads the running configuration. For device access I use the following and the test works fine: Here...
View Article