RTCD for Cisco ASA
The default rule for RTCD and the pre-configured Syslog rule did not work for our Cisco ASAs.1. Checksum line changes each time the config changes so it should be ignored by change detection.2. The...
View ArticleCisco wireless controller 7.3->
Hello all Trying to download cisco WLC config, its running 7.3.101 currently The default template provided by SW doesnt work, tried a script from the forums but that didnt work either. Anyone...
View ArticleConfig Change Templates Interactive Command Line
Is there a way to script NCM Change Templates to deal with Interactive Command Line Prompts? I am trying to write a template to update the code on Cisco ASA's, but the copy command keeps bringing up...
View ArticleNCM Data in Configuration Change Templates
I'm working on a configuration change template to update Cisco configurations across the enterprise. I want to detect if the target node is IOS or NX-OS, and issue different commands (write mem vs...
View Articleironport downloading config
Hi all.Can you help me with my S650 Web Security ironports? I added ironport in NCM, SNMP settings is OK, login is OK.I chose Template "Cisco Ironport".But when i start downloading config via NCM Web...
View ArticlePoll Dell Service Tag
Has anyone found a way to poll Dell service tag numbers from Dell switches? NCM polls a serial number, but I haven't been able to find anything in the inventory reports for the service tag. Also, when...
View ArticleClik here to view.
NCM and SWIS/SWQL
I'm unable to connect to the SWIS interface for my NCM server. I've confirmed that tcp port 17777 is open and listening. When I set the server type to NCM integration and point to my Orion Core server,...
View ArticleProvisioning Workflow Capabilities?
I am curious if the following provisioning workflow would be possible to automate with NCM via a template... Provision interface on network deviceEnable monitoring for the interface in Orion...
View ArticleBacking up Cisco Terminal Servers
HI Has anyone else found a solution to backing up Cisco routers that you use as terminal servers where you log into a Menu first then need to exit the first menu to get into enable mode or can give me...
View ArticleClik here to view.
using customised list of hosts from a text file to execute a set of commands
Dear All I am facing an issue where in i have an array of host not fit for the built in selection criteria (roughly 200 devices), i don't want to select nodes directly as my fingers give up shuffling...
View ArticleSNMP configs pulls using SNMP/TFTP to a device on the outside of the firewalls.
Ok I have a brain teaser for everyone. We have many devices that sit outside our firewalls. We have assigned our Orion server Firewall NATed addresses in addition to their internal addresses. In...
View ArticleClik here to view.
Testing my F5 backup file
Im backing up ten of these daily on my works network, however I want to test one as I raised a solarwinds support ticket and got advised it only backs up 90%....versions we are running are 10. 2.1 (I...
View ArticleNCM Search Functionality Not Working as Expected
When I use the "Search NCM" resource to look through the different configurations for IP's it doesn't seem to find them; however, I can manually go to the configurations and see that the IP's are...
View ArticleConnectivity issues discarding config file
I've been having this issue with V3.5.1 for quite some time now. Every night my config backups run I get a failed login report should different devices each night with a failure of "Connectivity...
View ArticleClik here to view.
Check many lines at once within Policy Manager?
So I'm wanting to compare a large chunk of config with a policy in Policy Manager (to a bunch of devices within NCM) which is roughly 30 lines long - the section for console access; line con/vty/tty on...
View ArticleExecuting Script in Schedule Job
Dear Members, I need technical suggestion on executing Script in Schedule Job. We are running script scheduling for specific commands on weekly basis for all network devices. We test the script and...
View ArticleNCM - Multiple TFTP Server IP Address or Per Device TFTP Server Assignment...
I am managing devices on the inside and on the outside of my network. For my routers on the Internet, I NAT the address of my SolarWinds NCM server (which is my TFTP server as well). All of my...
View ArticleEnergywise configuration Orion
hi all,i am getting a problem on orion NCM. I configured Energywise module on NCM and enable it on some network devices. After configuration the devices are ok but on NCM appear still disabled.Any...
View ArticleThwach activation in Solar Winds NCM summary page
Hi, I would like to know that how to enable Thwach activation in Solar Winds applications like NCM. In each Application Summary Page there isoption for Thwach messages. Please suggest how to activate...
View Article