Using Config Change Script to Identify Switch Interface Mode
Hello Everyone,I recently found out about the Config Change Scripts, and it is magnificent. I started using the (out-of-the-box) ones and tweaking them. Then started to write some for my own and...
View ArticleSFTP Server keeps resetting root directory
It just happened that I backed up my CallManagers via SFTP on the NCM server. So when NCM got its own SFTP server I thought great I will use that instead of FreeFTPd. It worked great except the root...
View ArticleNexus 6248 device templates
I have been using the Nexus 6140UCS template to do config compares of my Nexus 6248's because I havent seen a device template for this model. I am not sure if there is a problem with the template or...
View ArticleCisco VPN Concentrators
Hi, I am having trouble backing up my cisco VPN concentrators. I found a few threads on this issue but I'm still having a problem. I followed the below document however, when trying to dowload the...
View ArticleBlue Coat ProxySG 900 TFTP help!
Hi there, I have a Blue Coat ProxySG 900 device which I was hoping to automatically backup via NCM. The config backs up OK, but I get the following error message within NCM. "Transfer failure due to...
View ArticleHow to download config from NCM for cisco wlc 5508 1.3.6.1.4.1.9.1.1069
I am not able to download config for my Cisco WLC 5508 1.3.6.1.4.1.9.1.1069 from NCM.Can anybody help me on it. Simultaneously I am able to execute script for it. Regards,Mitul.
View ArticleNoob question about config scripts
Hi, I need to create a script - I just want the to send some commands: aaa group server tacacs+ EMA server <new IP address>no server <old IP>username <name> priv 15 password...
View ArticleHow can I insert "enter" command in script?
I have a new Alteon Server Load balancer that we can't get NCM to backup the config. What happens is after running this<Command Name="DownloadConfigIndirect" Value="/cfg/ptcfg ${StorageAddress}...
View ArticlePossible to schedule NCM change template execution?
I have built a change template, and want it to self-execute later in the evening. Is it possible to schedule execution of changes? If not, consider this is a feature request!! -Dave Horch
View ArticleSQL
Hello Guys, I'm trying to install the Solar winds applications below App : Network Performance Monitor NetFlow Traffic Analyzer IP Address Manager Network Config Manager But actually I'm confused with...
View ArticleConfig Change Report is always the same
I have NCM doing config change reports on about 150 different nodes. However, one keeps showing up, with the same changes. I have gone into the router, saved the running config, and downloaded both...
View ArticleClik here to view.
Config comparison with Nexus 1000v switches
Morning all, Has anyone had any success or experience with writing suitable comparison criteria for Cisco Nexus 1000v switches? As these are controlled by our vCenter install, the vEthernet interfaces...
View Articleneed assistance creating a script to update my physical interfaces
hello, I am new to scripting and I was wondering if someone could help to create a script or point me to one I can use update the phyiscal interfaces on difference models of Cisco IOS switches with qos...
View ArticleRTCD for HP Procurve
I'm trying to set up RTCD for HP Procurve routers and switches, and then alert on them as well. Is there a step by step for this? I can't seem to get the syslog triggers to ever work right and I'm...
View Articleneed help! asap! Linux Download and Uploading a config file
need help!i need to back up all configuration on my Linux/Centos 5.7 i already created two(2) config file that can download =====1===== this is the direct <Configuration-Management...
View ArticleDelay for Config Change Template
Is there a way to set a delay between commands that are sent using a NCM Config Change Template? I am having an issue with NX-OS devices that prompt for "yes"s or file names, etc and it doesnt get the...
View ArticleModify Field object properties
I'm trying to modify 'Field' properties in Orion Report Writer. The problem I have is that one of the Fields called 'description' pulls up information from Cisco devices (Cisco command: show version)...
View ArticleNCM Script Enquiry - The use of IF, Greater Than and Equals on the output of...
Hi All I have a particular scenario and hoping NCM can help us out. I'm not certain its NCM as I want to run this script from the Web Interface as a remediation script. I would be happy to run it...
View Article