Edit machine type in NCM node details
I ran network discovery on our IP range and it pulled all our devices. However, we have several Red Hat servers and NCM did not pull up the node name and machine type and listed it as "unknown". I...
View ArticleClik here to view.
Compliance Policy Report - Detailed Results
I am trying to create a policy to confirm that my edge interfaces are configured to standard. I have the policy working and by correcting the config on the switch, I can clear the alert on the...
View ArticlePolicy Reporting
In the Cirrus version 3, SolarWinds is adding Policy Reporting. Included within Cirrus will be numerous out-of-the-box policy reports. We want to ensure we include the types of policy reports our...
View ArticlePossible to add an snmp-server user to configs using NCM 7.1.1?
We are adding a second SNMPv3 SNMP user to our Cisco routers and switches. Is there any way to automate adding the SNMP user via using NCM? Thanks! Michael
View ArticleExecuting Script in Schedule Job
Dear Members, I need technical suggestion on executing Script in Schedule Job. We are running script scheduling for specific commands on weekly basis for all network devices. We test the script and...
View ArticleReport to show media type
I am trying to figure out a way to run a report that will show me what media type is running on my Gigabit ports SX or TX. Any ideas?
View ArticleEnabling session-trace on additional poller
I need to do a session-trace on a device being managed by an additional poller. When I check the "Enable Session Tracing" box, I do not get anything in the Session-Trace folder. Do I need to restart...
View ArticleRemoving a node from NCM but not NPM
Noob question.Our NCM installation has all of our NPM nodes listed in it, however I only want the manage the Cisco nodes. Is it possible to delete nodes from NCM but not NPM? I have tried finding it...
View ArticlePhantom Nodes in NCM
NPM 10.5, NCM 7.2 Just starting a rebuild of NCM (initial build wasn't fully configured). To test configuration backups, config change templates, and all that I put a single switch in NCM as 'licensed...
View ArticleTransfer Status stuck in NCM
Currently using NCM 7.2.2. Initialize the configuration backup and job goes in initializing state. After spending hours when job was not started, try to cancell the job. But unfortunately cancellation...
View ArticleUnable to remove node from NCM
I have a node in NCM that I cannot delete. If I delete it in NPM it does not delete it in NCM. If I do a database sync, it reappears in NPM. If I then try again to delete it, it removes it from NPM,...
View ArticleClik here to view.
Daily Config archive export error
Hello, Ever since upgrading to Network Configuration Manager v7.2.2, my daily config archive isn't working. I get the following in my emailed report: Exporting to //Server1/NASShare/NCM Exporting...
View ArticleClik here to view.
Need SQL on initial installation - Configuration Wizard error
New to NCM. Did a quick forum search and the install guide seems to assume SQL of some sort is already installed.Brand new installation of Windows 2008 R2. Trying to install 7.2.2. Following along...
View ArticleNCM connection refused
hello,am new in SolarwWnds and am trying to use NCM in order to have configuration history for my network devices . Cisco devises are working well and I have a configuration history , but when am...
View ArticleNCM 7.1.1, Additional Polling Engine, and FoE (Addtl Polling Engine License)
Hi Folks, I just wanted to share a case I have open with SW support relating to installing FOE on an additional polling engine that has the NCM 7.1.1 additional polling engine components installed....
View ArticleVariables in Scripts
Not sure if I'm missing something, but wondering if it's possible to use Alert type variables within scripts. I have quite a few F5 devices that I want to script UCS backups on, but need each filename...
View ArticleComparison critera with "and"?
Is it possible to create a regex for comparison criteria that uses the ^! Last operator AND if the line ends with a certain user? So for example, I want NCM to ignore the ! Last configuration change...
View ArticleNetwork Configuration Manager (NCM) shows node which was already deleted via...
Hello Thwack-Folks! The subject simply describes the issueI have at the moment.There is an old network node, which was deleted via Webinterface.The node is still available in the node list of the NC...
View ArticleClik here to view.
ESXI 4.1 configuration file
Hi everybody. Could be possible to automaticaly import ESXI 4.1 configuration file (around 13 k) inside NCM ?Normaly, I do this using VSphere CLI with viccfg-backupconf.pl command. Is it possible to...
View Article